Impact Hammer Model 086E80 | PCB

Manufacture: PCB Piezotronics
SKU: 086E80

Miniature Instrumented Impulse Hammer, 0 to 50 lbf

  • Sensitivity: (±20%)100 mV/lbf (22.5 mV/N)
  • Measurement Range: 50 lbf pk (222 N pk)
  • Hammer Mass: 0.17 oz (4.8 gm)

Each PCB® Modally Tuned®, ICP® instrumented impact hammer features a rugged, force sensor that is integrated into the hammer’s striking surface.

“Modal Tuning” is a feature that ensures the structural characteristics of the hammer do not affect measurement results. This is accomplished by eliminating hammer resonances in the frequency range of interest from corrupting the test data, resulting in more accurate and consistent measurements.

The force sensor provides a measurement of the amplitude and frequency content of the energy stimulus that is imparted to a test object. Accelerometers are used in conjunction with the hammer to provide a measurement of the object’s structural response due to the hammer blow. A variety of tips supplied with each hammer permit the energy content of the force impulse to be tailored to suit the requirements of the item under test.

Using multi-channel data acquisition and analysis software, the test engineer is able to ascertain a variety of mechanical properties leading to an understanding of an object’s structural behavioral characteristics. Items analyzed can include resonance detection, mode shapes, transfer characteristics, and structural health – such as crack and fatigue detection.
  1. Modally Tuned® to provide more consistent results
  2. Variety of hammers to suit any size test object
  3. Assortment of tips offer frequency tailored impulse
  1. Structure Health Testing
  2. Resonance Determination
  3. Modal Analysis
  1. Model 086C01
  2. Model 086C02
  3. Model 086C03
  4. Model 086C04
  5. Model 086D05
  6. Model 086D20
  7. Model 086D50